Double Roller Crusher Rock Stone Crushing Machine Concrete Grinder Electric Shatter Pulverizer 220V 1.5KW

ParameterModel: 200*75Roll size (diameter × Width): 200*75mm(7.9”*3”）Maximum loading size: 10mm （0.4”）Discharge particle size: 0-4mm（≤0.16”）Production capacity: (when the roller gap is 4mm) 860 kg/h Roll rotation speed: 450 rpmPulley size: 280*60mm（11”*2.4”）Motor power: 1.5 kWUsing ＆ Maintenance（1）Check carefully whether the fasteners are firm and tight.（2）Whether the transmission belt is in good condition. If it is damaged, replace it in time, and wipe it clean when there is oil on the belt or pulley.（3）After checking that all parts of the machine are normal, it can be started.（4）The machine is only allowed to start when there is no load.（5）After starting, check the direction of roll rotation.（6）After starting, if an abnormal situation is found, the machine should be stopped immediately, and the cause can be found before restarting.（7）If there is a jam or shutdown during use, immediately cut off the power supply and remove the material.（8）Keep the machine clean. After each use, wipe off the dust and coal dust on the machine in time.NoteThis machine has no plug and needs to be connected to the air switch for use by the customer.

• Double Roller Crusher: Roll crusher is a machine that utilizes the friction of roll surface to bite the material into the crushing zone and subject it to extrusion or splitting and crushing, which is suitable for coarse crushing, medium crushing or fine crushing of coal, limestone, cement clinker and feldspar and other materials below medium hardness
• Adjustable Discharge Port: The clockwise rotation spacing becomes smaller and the clockwise rotation spacing becomes larger. Note:This machine has no plug and needs to be connected to the air switch for use by the customer (we have a video of the wiring, if you can't wire it, you can contact us for a video reference)
• Higher Production: This machine equipped with 220V 1.5KW high power motor, strong power, low heat generation, stable operation. Enlarged and thickened feed port (170*200MM/6.7*7.9in), fast and efficient feeding for faster branch breakdown, improved work efficiency. The roll rotating speed is 450rp.
• Premium Material: Solid double roller wheel, uniform discharge size, adjustable discharge size, strong wear resistance. Pure copper motor, high quality, more reliable
• Application: This machine is a smooth double-roller crusher, which is suitable for the laboratories and laboratories of geology, metallurgy, building materials, coal, mineral processing, scientific research institutes, etc. to crush all kinds of medium and low hardness For ore or rock, its compressive strength is not higher than 700 kg/cm