M-Series 100W 12VDC Magnetic Phase Dimmable LED Driver, 120V

Magnitude Lighting M-Series 100W LED Driver — 12V DC

Magnitude Lighting M-Series LED Driver M100L12DC-AR is a 100W Constant Voltage magnetic driver with 120VAC input and 12V DC output. It is phase dimmable using a leading (forward) edge MLV TRIAC dimmer only and supports dimming down to 1%. Built in a coated metal housing with an Integrated Junction Box and multiple 7/8 in. knockouts for clean installation.

Key Features

• Power: 100W max
• Input Voltage: 120VAC ±5%, 50/60Hz
• Output Voltage: 12VDC
• Driver Type: Constant Voltage (magnetic)
• Dimming: Phase dimmable; leading (forward) edge MLV TRIAC dimmer only; 1% minimum dimming level
• Dimensions: 9.80 in. L x 3.00 in. W x 2.74 in. H
• Enclosure Type: Integrated Junction Box with multiple 7/8 in. knockouts; coated metal housing
• IP Rating: Not specified
• Class 2: Not specified for 100W model
• Certifications: ETL Listed; conforms to UL STD 2108; C22.2 No. 223

Physical Design & Installation

Coated metal enclosure with flange mounting and an Integrated Junction Box designed for hardwiring. Multiple 7/8 in. knockouts support standard fittings and simplify routing of line and low-voltage conductors.

Dimming & Controls

Phase dimming is supported with a standard leading (forward) edge MLV TRIAC dimmer only. This is a constant voltage 12VDC driver intended for 12V LED tape, linear, and other 12VDC loads; dimming performance is specified down to 1% minimum dimming level. Minimum load requirement is not specified.

Performance & Build

Magnetic core design with primary and secondary auto-reset circuit breakers for protection. Environmental rating is dry and damp per the specification sheet; ETL Listed and conforms to UL STD 2108 and C22.2 No. 223.

Typical Applications

• 12VDC LED tape and accent lighting runs
• Linear and under-cabinet lighting systems
• Residential and commercial dimmable 12VDC LED installations
• Dry and damp location installations